3
Pull out the SD memory card.
4
Close the cover.
Plugging and unplugging a
USB storage device
CAUTION
!
To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!
If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
When you run this navigation system on power
from the built-in battery alone, you cannot use
an iPod and a USB memory device. To use
them, supply power through this product by
another method, such as connecting an AC
adapter or vehicle power charger.
Plugging in a USB storage device
1
Connect the supplied USB cable to USB
connector.
2
Plug a USB storage device into the USB
connector.
USB cable (supplied)
USB storage device
p
Compatibility with all USB storage device is
not guaranteed.
Optimum performance of this navigation
system may not be obtained depending on
the USB storage device that is connected.
p
Connection via USB hub is not available.
Unplugging a USB storage device
%
Pull out the USB storage device after
checking that no data is being accessed.
Basic operation
En
13
Chapter
02
Basic
operation