Pioneer AVIC-N3, Руководство по оборудованию

Страница: 12 / 27

10
If the marks other than listed are found on DVD
disc labels and packages, please ask for the DVD
disc supplier for their meaning.
When an operation is prohibited
When you are watching a DVD and attempt to
perform an operation, sometimes it may not be
performed because of the programming on the
disc. When this happens, this product indicates
the icon on the screen.
❒ The icon may not appear in certain discs.
Resetting the Microprocessor
• Pressing the RESET button deletes the
contents of the navigation system’s mem-
ory. For details, see section “About the
Data being Deleted” of the Operation Man-
ual.
Pressing the RESET button lets you reset the
microprocessor to its initial settings without
changing the condition memory.
The microprocessor must be reset under the fol-
lowing conditions:
• Prior to using this product for the first time
after installation.
• If the product fails to operate properly.
• If there appear to be problems with the opera-
tion of the system.
• When changing the combination of the equip-
ment.
• When adding/removing additional products
that connect to this product.
• When the display and the Hide-away units are
re-connected.
1
Turn the ignition switch OFF.
2
Press the RESET button with a pen tip or
other pointed instrument.
❒ If you have connected other equipment (for
example, a TV tuner) to this navigation system,
be sure to reset that equipment too.
❒ After completing connections or when you
want to erase all memorized settings or return
this product to its initial (factory) settings
except for some navigation items, switch your
engine ON or set the ignition switch to ACC
ON before pressing the
RESET button.
➲
For details, refer to “About the Data being
Deleted” in the Operation Manual.
RESET button