Pioneer AVIC-N3, Руководство по оборудованию

Страница: 19 / 27

17
App
endi
x
Appendix
Troubleshooting
➲ About troubleshooting other than description
below
➞ Appendix of the Operation Manual
Symptom Cause Action (See)
No picture. The parking brake cord is not connected. Connect a parking brake cord, and apply the
parking brake.
The parking brake is not applied. Connect a parking brake cord, and apply the
parking brake.
The picture is
stretched, the aspect is
incorrect.
The aspect setting is incorrect for the dis-
play.
Select the appropriate setting for your dis-
play. ( ➞ “Changing the Wide Screen Mode”
and “Operating the Picture Adjustment” in
the Operation Mannual.)
Rear display picture
disappears.
The source disc being listened to with the
navigation system has been ejected.
Before ejecting the disc, switch the source.
This problem may occur when certain con-
nection methods are used.
The REAR/GUIDE button was pressed and
REAR ON mode switched off.
Press the REAR/GUIDE button to turn
REAR ON mode on.
There was a problem with the rear display
or a faulty wiring connection, for example.
Check the rear display and its connection.
Rear View is selected on the screen. Select view mode other than Rear View.
When the shift lever is in [R], displays rear
view camera images. (When “ NAVI ” is
selected in REAR DISP menu.)
Move the shift lever other than turn [R] posi-
tion. (Select “ SOURCE ” in REAR DISP
menu.)
The source without a video is selected. Switch the source with a video.
Operating the PICTURE ADJUSTMENT . There is no picture on the rear display while
the PICTURE ADJUSTMENT is carried
out.
Nothing is displayed
and the touch panel
keys cannot use.
The setting for the rear view camera is
incorrect.
The shift lever was placed in [R] when the
rear view camera was not connected.
Connect a rear view camera correctly.
Press the NAVI/AV button to return to the
source display and then select the correct
setting for CAMERA .
➲ About CAMERA setting
➞
Operation
Manual
Adjusting the volume
of navigation guid-
ance and beep is not
possible.
You cannot adjust them with the VOLUME/
ATT button.
• Turn the volume up or down according to
“ Volume ” in the Setting menu.
• Press the REAR/GUIDE button ond turn
the volume up or down.
Playback is not possi-
ble.
The disc is dirty. Clean disc.
The loaded disc is a type your navigation
system cannot play.
Check what type the disc is. ( ➞ Page 18)
Non compatible video system disc is
loaded.
Change to a disc compatible to your video
system. ( ➞ Page 18)
The loaded disc has a different region num-
ber from the navigation system.
Replace the disc with one featuring the
same region number as the navigation sys-
tem. ( ➞ Page 7)
LCD Panel knocking
against your vehicle’s
console or dashboard.
Incorrect setting of angle. Press the ANGLE (+/–) button to adjust the
LCD angle. Forcibly adjusting the LCD panel
by hand may damage it.
Video image appears
grainy.
This happens when videos are viewed in
CINEMA or ZOOM mode.
Select a different mode to view videos.