Pioneer AVIC-800DVD, Руководство по эксплуатации

Страница: 116 / 190

115
Chapter
6
Combining and Using Pioneer A
V
Equipment
5 Press TA/NEWS button on the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R)
while a traffic announcement is being received to cancel the announcement.
The tuner returns to the original source but remains in the standby mode until TA/NEWS
button is pressed again.
➲
The system switches back to the original source following traffic announcement reception.
➲
Only TP and enhanced other network’s TP stations are tuned in during seek tuning or BSM
when TA is on.
Responding to the TP alarm
When a TP or enhanced other network’s TP station is lost due to a weak signal a series of
short beeps, about five seconds long, sound to remind you to select another TP or enhanced
other network’s TP station.
➲
When listening to sources other than the tuner, the Pioneer AV Head Unit will automatically
seek out a TP station with the strongest signal after a 10- or 30-second delay. The delay is
10 seconds if TA is on and 30 seconds if TA and AF are on.
■
Using PTY functions
You can tune in a station by using PTY information.
Searching for a RDS station by PTY information
You can search for general types of broadcasting programs, such as those listed on page 117.
1 Press
5
or
∞
to select “PTY” from the TUNER MENU, and press A.MENU (AUDIO)
button.
2 Press
2
or
3
to select a program type.
There are four program types:
News&Inf - Popular - Classics - Others
3 Press
5
to begin the search.
Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400R) searches for a station broad-
casting that program type. When a station is found its program service name is displayed.
➲
You can stop search with the
∞
.
➲
The program of some stations may differ from that indicated by the transmitted PTY.
➲
If no station is broadcasting the type of program you searched for, “NOT FOUND” is dis-
played for about two seconds and then the tuner returns to the original station.
CRB1875A_Eng.book Page 115 Thursday, March 27, 2003 1:22 PM