Adjusting the LCD panel
slide position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
1 Touch A.MENU and SETUP and then
touch FLAP SET BACK.
2 Touch
a
and the LCD panel slides to the
back.
#
Touch
b
and the LCD panel slides to the
front.
Setting the video of rear
display
You can select either showing the same
source as the front display or showing the
video source on rear display independently.
!
When selecting
FRONT SOURCE
in
REAR MODE
, when the selected source is
an audio source, nothing is displayed on
rear display.
!
When selecting
FRONT SOURCE
in
REAR MODE
, audio is not outputted from
REAR OUT
.
1 Touch A.MENU and SETUP and then
touch REAR MODE.
2 Touch either of the following touch
panel keys to select the video on rear dis-
play.
!
FRONT SOURCE
Display the same source
as the front display
!
SEPARATE
Display the video source on
rear display independently of front dis-
play
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owner
s man-
ual.
Selecting AUX as the source
%
Touch the source icon and then touch
AUX to select AUX as the source.
#
When the source icon is not displayed, you
can display it by touching the screen.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, see
Switch-
ing the auxiliary setting
on page 84.
Setting the AUX title
The title displayed for the
AUX
source can be
changed.
1 After you have selected AUX as the
source, touch A.MENU and FUNCTION and
then touch NAME EDIT.
2 Touch ABC to select the desired charac-
ter type.
Touch
ABC
repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols
Alphabet (lower case)
#
You can select to input numbers and symbols
by touching
012
.
#
You can also switch character types by click-
ing the joystick.
Other Functions
En
88
Section
17
