Pioneer AVH-P5900DVD, Руководство по эксплуатации

Страница: 81 / 106

!
Set the front or rear speaker to LARGE if
the speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1 Touch NEXT on the DSP function menu.
2 Touch SPEAKER SETTING.
3 Touch
a
or
b
to select the speaker to
be adjusted.
Each time you touch
a
or
b
selects the speak-
er in the following order:
FRONT
(front speakers)
—
CENTER
(center
speaker)
—
REAR
(rear speakers)
—
SUB WOOFER
(subwoofer)
—
PHASE
(subwoo-
fer setting)
#
You can switch to PHASE only when the sub-
woofer has been set to
ON
.
4 Touch
c
or
d
to select the correct size
for the selected speaker.
Each time you touch
c
or
d
selects the size in
the following order:
OFF (off)
—
SMALL (small)
—
LARGE (large)
#
You cannot select
OFF
, when
FRONT
(front
speakers) have been selected.
#
You can select
ON
or
OFF
, when
SUB WOOFER (subwoofer) has been selected.
#
You can switch REVERSE (reverse phase) or
NORMAL (normal phase), when PHASE (subwoo-
fer setting) has been selected.
Correcting the subwoofer
’
s phase
If trying to boost the bass output of the sub-
woofer doesn
’
t do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofer
’
s output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
1 Touch NEXT on the DSP function menu.
2 Touch SPEAKER SETTING.
3 Touch
a
or
b
to select SUB WOOFER
(subwoofer).
Each time you touch
a
or
b
selects the speak-
er in the following order:
FRONT
(front speakers)
—
CENTER
(center
speaker)
—
REAR
(rear speakers)
—
SUB WOOFER
(subwoofer)
—
PHASE
(subwoo-
fer setting)
4 Touch
d
to turn subwoofer output on.
#
To turn subwoofer output off, touch
c
.
5 Touch
b
and then touch
c
or
d
to se-
lect the phase of subwoofer output.
Touch
d
to select normal phase and
NORMAL appears in the display. Touch
c
to
select reverse phase and REVERSE appears in
the display.
Note
When playing a 2-channel mono source with Pro
Logic turned on, there may be occasions when
the following will occur:
!
No audio is outputted if the center speaker
setting is
SMALL or LARGE and no center
speaker is installed.
!
Audio is heard only over the center speaker if
installed and the center speaker setting is
SMALL
or
LARGE
.
Adjusting the speaker output
levels
Speaker level can be adjusted finely by listen-
ing to an audio output. First, use test tone to
adjust the approximate speaker level, and then
use this function to adjust finely.
1 Touch NEXT on the DSP function menu.
2 Touch SPEAKER LEVEL.
Available accessories
En
81
Section
04
A
vailable
accessories