Pioneer AVH-P5900DVD, Руководство по эксплуатации

Страница: 78 / 106

Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Touch POSITION on the DSP function
menu.
2 Touch
c
/
d
/
a
/
b
to select a listening po-
sition.
Touch one of these,
c
/
d
/
a
/
b
, to select a lis-
tening position as listed in the table.
Key Display Position
c
FRONT-L Front seat left
d
FRONT-R Front seat right
a
FRONT
Front seats
b
ALL
All seats
#
To cancel the selected listening position,
touch the same key again.
Note
When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to
Adjusting the speaker
output levels using a test tone or Adjusting the
speaker output levels .
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Touch FADER/BALANCE on the DSP
function menu.
2 Touch
a
or
b
to adjust front/rear
speaker balance.
Each time you touch
a
or
b
it moves the
front/rear speaker balance towards the front or
the rear.
FRONT:25 to REAR:25 is displayed as the
front/rear speaker balance moves from front to
rear.
#
FR: 0
is the proper setting when only two
speakers are used.
3 Touch
c
or
d
to adjust left/right speak-
er balance.
Each time you touch
c
or
d
it moves the left/
right speaker balance towards the left or the
right.
LEFT:25
to
RIGHT:25
is displayed as the left/
right speaker balance moves from left to right.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM volume level,
which remains unchanged.
1 Compare the FM volume level with the
level of the source you wish to adjust.
2 Touch SLA on the DSP function menu.
3 Touch
c
or
d
to adjust the source vo-
lume.
Each time you touch
c
or
d
it increases or de-
creases the source volume.
+4
to
–
4
is displayed as the source volume is
increased or decreased.
Available accessories
En
78
Section
04