Pioneer AVH-P5050DVD, Руководство по эксплуатации

Страница: 45 / 98

%
Touch AM STEP on the initial menu to
select the AM tuning step.
Touching
AM STEP
will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
FULL ) or subwoofer ( S.W ) con-
nection. If you switch the rear output setting
to
S.W , you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
ary amp.
Initially, the unit is set for rear full-range speak-
er connection (
FULL
). When rear output is
connected to full range speakers (when FULL
is selected), you can connect other full range
speakers (
REAR ) or a subwoofer ( S.W ) to the
RCA rear output.
!
When the multi-channel processor (e.g.,
DEQ-P7650) is connected to this unit, you
cannot operate this function.
1 Touch REAR SP on the initial menu.
2 Touch
c
or
d
next to REAR SP to switch
the rear output setting.
Touch
c
to select full-range speaker and
FULL
appears in the display. Touch
d
to select sub-
woofer and
S.W
appears in the display.
#
When no subwoofer is connected to the rear
output, select FULL (full-range speaker).
#
When a subwoofer is connected to the rear
output, select
S.W
(subwoofer).
#
When the rear output setting is
S.W
, you can-
not operate the following procedure.
3 Touch
c
or
d
next to PREOUT to switch
the subwoofer output or rear output.
Touching
c
or
d
will switch between S.W and
REAR and that status will be displayed.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
38).
!
If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the sound muting/
attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
%
Touch TEL to select any of the muting,
attenuation or off.
Touch TEL until the desired setting appears in
the display.
!
MUTE
–
Muting
!
ATT -20dB
–
Attenuation (
ATT -20dB
has a
stronger effect than
ATT -10dB
)
!
ATT -10dB
–
Attenuation
!
OFF
–
Turn the sound muting/attenuation
off
Notes
!
The sound is turned off, MUTE is displayed
and no audio adjustments are possible.
!
The sound is attenuated, ATT is displayed and
no audio adjustments, except volume control,
are possible.
!
Operation returns to normal when the phone
connection is ended.
Switching the warning tone
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can
turn off the warning tone.
1 Touch NEXT on the initial menu.
Operating this unit
En
45
Section
03
Operating
this
unit