22
En
1
Touch the current time on the screen.
2
Touch
or
to set the correct time and date.
You can operate the following items: Year, month, date, hour, minute.
TIPS
•
You can change the time display format to [12hour] or [24hour].
•
You can change the order of date display format: Day-month, Month-day.
You can set the screen mode for AV screen and image files.
1
Touch the screen display mode key.
2
Touch the desired mode.
Other functions
Setting the time and date
Changing the wide screen mode
Screen display mode key
[Full]
Displays 16:9 images on the full screen without changing the ratio.
NOTES
•
Images other than 16:9 images for DVD may be displayed in the full screen with
the ratio change.
•
Enlarges and displays images of USB sources keeping the ratio of the original
source image.
[Zoom]
Displays the images enlarging them vertically.
[Normal]
Displays images without changing the 4:3 aspect ratio.
NOTES
•
For USB sources, 4:3 aspect ratio may not be displayed.
•
Devices connected with USB MTP are not supported.
[Trimming]
An image is displayed across the entire screen with the horizontal-to-vertical ratio
left as is. If the screen ratio differs from the image, the image may be displayed
partly cut off either at the top/bottom or sides.
NOTE
[Trimming] is for image files only.
TIPS
•
Different settings can be stored for each video source.
•
When a video is viewed in wide screen mode that does not match its original aspect ratio, it may
appear different.
•
The video image will appear coarser when viewed in [Zoom] mode.
NOTE
Image files can be set to either [Normal] or [Trimming] in wide screen mode.
You can restore settings or recorded content to the default settings from [Restore
Settings] in the [System] menu (page 17).
If you have problems operating this
product, refer to this section. The most
common problems are listed below, along
with likely causes and solutions. If a
solution to your problem cannot be found
here, contact your dealer or the nearest
authorised Pioneer service facility.
A black screen is displayed, and
operation is not possible using the touch
panel keys.
Power off mode is on.
– Press any button on this product to
release the mode.
CD or DVD playback is not possible.
The disc is inserted upside down.
– Insert the disc with the label upward.
The disc is dirty.
– Clean the disc.
The disc is cracked or otherwise
damaged.
– Insert a normal, round disc.
The files on the disc are in an irregular
file format.
– Check the file format.
The disc format cannot be played back.
– Replace the disc.
The loaded disc is a type this product
cannot play.
– Check what type of disc it is.
The screen is covered by a caution
message and the video cannot be shown.
The handbrake lead is not connected or
the handbrake is not applied.
– Connect the handbrake lead correctly,
and apply the handbrake.
The handbrake interlock is activated.
– Park your vehicle in a safe place and
apply the handbrake.
No sounds are produced. The volume
level will not rise.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video.
– There is no sound during still, slow
motion, or frame-by-frame playback
with DVD-Video.
Restoring this product to the default settings
Appendix
Troubleshooting
Common problems
Problems with the AV screen
