Pioneer A-10AE, Инструкция по эксплуатации

Страница: 13 / 52

13
En
Others
When automatic standby is on, the unit automatically
switches to standby mode after 20 minutes of no audio input
without any operations.
1. Press and hold
Í STANDBY/ON on the main unit until
the "DIRECT" and "LOUDNESS" indicators either blink or
light.
0
The unit has switched to the setting mode when the
indicators blink or light and the current setting is
displayed.
2. Take your finger off Í STANDBY/ON for a moment.
3. Switch auto standby on or off by pressing and holding
Í
STANDBY/ON again.
- On (default value): "DIRECT" and "LOUDNESS"
indicators are blinking
- Off: "DIRECT" and "LOUDNESS" indicators light
0
The setting mode ends after 5 seconds elapse with no
operations performed.
0
60 seconds before switching to standby mode, the input
source indicator for the currently selected source starts
blinking.
0
Depending on the connected device, the auto standby
feature may not engage due to factors such as noise.
Useful functions
Setting auto standby
(LIGHTING)
(BLINKING)
OFF
ON
3"
3
3"
1
2
SN29403412_A-10AE_En_1804XX.book 13 ページ ２０１８年５月１４日 月曜日 午前１１時３分