Controls and displays
03
26
En
10
(reverse scan/skip)
• Press and hold for fast reverse scanning
• Press to jump back to the beginning of the
current chapter or track, then to previous
chapters/tracks
11
(forward scan/skip)
• Press and hold for fast forward scanning
• Press to jump to the next chapter or track
12
(stop)
Press to stop the disc (you can resume
playback by pressing
(play)).
13
(pause)
Press to pause playback. Press again to
restart.
14
(play)
Press to start or resume playback (when in
standby, this button will also switch the power
on).
15 Disc tray
16
This mark indicates compatibility with DVD-
RW discs recorded on a DVD recorder in
Video Recording mode.
About progressive scan video
Compared to interlace video, progressive
scan video effectively doubles the scanning
rate of the picture, resulting in a very stable,
flicker-free image.
Progressive scan video is available only from
the component video output. Use the
PROGRESSIVE
button on the front panel to
switch the component video output between
interlace and progressive. With a DVD-Video
disc you can do this during playback, or when
the disc is stopped. For other types of disc, the
player must be stopped.
• If you connect a TV that is not compatible
with a NTSC or PAL progressive scan
signal and switch the player to
progressive, you will not be able to see any
picture at all. In this case, press the
PROGRESSIVE
button on the front panel
to switch back to interlace (the
PROGRESSIVE
indicator should be unlit).
• You can’t switch video output when an
OSD is on-screen.
• The picture on some TVs may
momentarily break up when you switch
the video output of this player.
DV-79AVi.book Page 26 Tuesday, August 2, 2005 4:48 PM
