2
Press BAND to select a band.
Press
BAND
until the desired band (
F1
,
F2
,
F3
for FM or
AM
) is displayed.
3
To perform manual tuning, briefly press
c
or
d
.
4
To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
While pressing and holding
c
or
d
, you can
skip stations. Seek tuning starts as soon as you
release
c
or
d
.
Storing and recalling broadcast
frequencies
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
Memorized radio station frequency can be re-
called by pressing the preset tuning button.
#
Up to 18 FM stations, six for each of the three
FM bands, and six AM stations can be stored in
memory.
#
Press
a
or
b
to recall radio station frequen-
cies.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Press FUNCTION to select LOCAL.
2
Press
a
or
b
to turn local seek tuning
on or off.
3
Press
c
or
d
to set the sensitivity.
FM:
LOCAL 1
—
LOCAL 2
—
LOCAL 3
—
LOCAL 4
AM:
LOCAL 1
—
LOCAL 2
The
LOCAL 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons
1
to
6
.
Once stored you can tune in to those frequen-
cies with the touch of button.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons
1
to
6
.
1
Press FUNCTION to select BSM.
2
Press
a
to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#
To cancel the storage process, press
b
.
Built-in Player
Playing a disc
1
Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD (CD-ROM) has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD (CD-ROM) by pressing
EJECT
.
2
Press
a
or
b
to select a folder when
playing a compressed audio.
#
You cannot select a folder that does not have
a compressed audio file recorded in it.
#
To return to folder 01 (ROOT), press and hold
BAND
. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
Operating this unit
En
8
Section
02
