Pioneer Eclipse StripVac, Руководство по эксплуатации

Страница: 7 / 28

5
Cleaning
IMPORTANT! Clean the StripVac after each use.
1. Place the StripVac in an appropriate area for draining.
2. Remove the dump hose from the spring hose clip at the rear of the machine.
3. Unplug hose plug from dump hose and lower to drain.
4. Open the lid on the top of the tank and rinse the inside of the tank with hot water.
5. Rinse out the suction hose (the one at the front of the machine).
6. Rinse the squeegee.
7. Once unit is thoroughly cleaned and drained, plug in the dump hose and attach hose to hose clip.
8. Clean the optional vacuum wand.
IMPORTANT! Do not get water in the vacuum hose (the one that is connected to the vacuum motor),
or on any electrical components.
CAUTION: Do not lift the tank when it contains liquid.
NOTE: When lowering the tank to its seated position, use care not to kink or crush hoses. Do not
drop the tank into place. Lower the tank gently into position.