Pioneer Eclipse StripVac, Руководство по эксплуатации

Страница: 11 / 28

9
Battery Replacement
CAUTION : Use only batteries supplied by Pioneer Eclipse.
1. Switch OFF the power switch.
2. Drain recovery tank.
3. Park the machine in a safe, flat area.
4. Raise the tank unit.
5. Unplug the batteries from the machine. Take hold of both connectors to remove. Do not pull on the
cable.
6. Remove the connection cable from the battery terminals (first the negative terminal, then the positive.) Be
careful not to ground the wrench on the metal frame.
7. Remove the batteries, firmly gripping with both hands. Place the batteries carefully on the floor.
8. Place new batteries in the correct positions in the battery tray. Hold each battery firmly with both hands
and install it gently in the tray.
9. Connect the two cables to the new batteries’ terminals as shown in “Connecting the Batteries and
Vacuum Motor”. Make sure that you are connecting it in the correct way. First, connect a cable to the
positive terminal, and then to the negative terminal.
10. Plug into connection firmly.
11. Lower the recovery tank carefully.