Pioneer Eclipse PE-200BU, Руководство оператора

Страница: 4 / 12

NOTE: The hardened steel cam release lever does not require extreme tightening to effectively hold the handle in
position. Over-tightening will shorten the functional life of the lever. (Fig 3)
How to Operate the Machine
Plug the machine in as directed and lower the handle to the desired operating height. Push the safety switch
forward (Fig 4) and squeeze the switch triggers beneath the handle grips. This activates the motor and starts
the pad driver, brush, or attachment in operation. Each time you release the triggers the safety switch will reset.
You will need to follow the direction above to restart the machine.
CAUTION: When leaving the machine unattended, disconnect the wall plug and return the handle to the
“locked” upright position to prevent accidental starting.
Push the machine forward in a straight line, at a slow walking speed. Overlap each pass by about 1 inch
(25mm).
After Using the Machine
Upon completion, dust mop with treated mop to pick up all burnishing residue.
The condition of the floor pad has direct affect on the performance of your burnisher. When the pad becomes
dirty, turn it over and use the other side. When finished, wash the pad out and allow it to dry completely before
using again.
Unplug the power cord and wrap it under the cord hook and over the right handle grip.
Tip the machine back and remove floor pad.
Wipe off the machine housing and the cord. This will prevent build-up of unnecessary residue.