Pioneer Eclipse PE-200BU, Руководство оператора

Страница: 2 / 12

SAFETY INSTRUCTIONS
The PE-200BU should be grounded while in use to protect the operator from electric shock. This machine is equipped
with a 3-conductor cord and a 3-prong grounded type attachment cap plug to fit the proper grounding type receptacle.
The green (or green and yellow) conductor in the cord is the grounding wire. Never connect this wire to anything other
than the grounding blade.
The PE-200BU is provided with an attachment cap plug, as shown in Sketch A, and is intended for use on a nominal
120 volt circuit. If a properly grounded receptacle, as shown in Sketch A, is unavailable, an adapter, as shown in Sketch
C, is available and should be installed, as shown in Sketch B, if the outlet box that houses the receptacle is grounded.
Be sure to fasten the grounding tap to the faceplate screw.
These guidelines are presented for your protection and convenience. Please read them carefully, since a failure to heed
these precautions could result in discomfort or injury. When using an electrical appliance, basic safety precautions
should always be followed.
ONE LAST REMINDER! Read all Instructions, Warnings, and Cautions before using!
WARNING! TO AVOID FIRE, DO NOT USE WITH A FLAMMABLE OR COMBUSTIBLE LIQUID
TO CLEAN FLOOR.
Uncrating
Your PE-200BU was protectively packed to prevent damage in shipment. We suggest that upon removing the unit from
its carton, you carefully inspect it for any possible damage in transit. If damage is discovered immediately notify the
transportation company who delivered your machine. As a manufacturer, we are unable to act upon any claim for
concealed damage; you must originate the claim.
Important Safeguards
This machine is designed to be safe when used to perform the functions specified in the OPERATORS Manual. Should
damage occur to electrical or mechanical parts, the machine should be repaired by the manufacturer or competent
service station before using in order to avoid further damage to the machine or physical injury to user. Your floor
machine is equipped with a safety switch lockout device designed for your safety. Do not attempt to bypass or defeat
the safety lockout device. Never use any device to lock the power switch triggers in the ON position.