I n t r o d u c t i o n
This operator's manual will help you get the most use of your new BrightStar 300H machine. Please read
the instructions thoroughly before operating the machine. This product is intended for commercial use only.
UNPACKING
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage
is evident, save the shipping carton so that it can later be inspected by the Freight Company. Contact Pioneer
Eclipse Customer Service immediately for instructions on how to file for a freight damage claim.
SERIAL NUMBER PLATE
The Serial Number plate of your machine is located on the left side of the wall in the base compartment.
Please make a note of the Model and Serial Numbers of your machine, below, for future reference.
MODEL: ______________________
SERIAL NUMBER: _____________________
Be sure to fill out and return your warranty card.
PARTS AND SERVICE
Repairs, when needed, should be performed by your authorized Pioneer Eclipse dealer only. They maintain a
complete inventory of original replacement parts and accessories. Call the distributor from whom you
purchased your machine when you need parts or service. Please specify the Model and Serial numbers of
your machine when calling for parts or service.
2
DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ
THIS SECTION.
IMPROPER USE WILL VOID THE WARRANTY.
•
Always use a defoamer when foaming occurs to prevent vacuum motor damage.
•
Never use water above 134ºF (54ºC).
•
Do not use outdoors or where temperature is below freezing. Protect your machine
from any extremes in temperatures.
•
Do not let pump run dry. Turn the pump off and refill the tank when cleaning
solution gets low.
•
Flush the machines with acid de-scaler regularly (monthly or more often) to prevent
a build-up of minerals or chemicals in the pump, lines and heat system. Follow the
flush with a clear water rinse to remove any particles and to rinse the acid from the
machine.
•
Use approved chemicals only. All chemicals should be mixed thoroughly. Liquid
chemicals are recommended to prevent powder buildups. A pH between 6 and 9 is
highly recommended. The use of high alkaline detergents or strong acids will
accelerate the wear of the pump and seals, and will void the warranty.
•
All extension cords must have a rating of at least 12/3 (#12 cord). Extension cords
should be no longer than 50 feet (15 m). Replace the plug immediately if the
ground prong becomes damaged or is broken off.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
