80
Using the Performance Pads
•
Press the [
PARAMETER
] or [
2X
] button during loop playback to double the loop
length with each press.
•
Press the Performance Pad again while pressing the [
SHIFT
] button to return to the
loop-in point and start playback from there.
•
Press the Performance Pad again to cancel loop playback.
Auto Loop mode
If you press a Performance Pad, a loop is set with the number of beats assigned to the
Performance Pad and loop playback continues even if you release the Performance Pad.
1 Press the [SAVED LOOP] button twice in succession.
The unit switches to Auto Loop mode.
2 Press a Performance Pad during playback.
Loop playback starts according to the number of beats assigned to the Performance Pad.
•
The number of beats is displayed on the Serato DJ Pro screen in the same way as
the number of beats for Roll (page 70).
•
Press the [
PARAMETER
] or [
PARAMETER
] button during loop playback to
change the length of a loop being played (page 65).
•
Press the [
PARAMETER
] or [
PARAMETER
] button while pressing the [
SHIFT
]
button during loop playback to move a loop without changing the loop length.
•
Press the Performance Pad again to cancel loop playback.
