19
PC/Mac setup
Checking the firmware and dedicated software versions
1 Click the [About] tab.
Fader Start options.
To enable the Fader Start function, select [
CUE
] or
[
HOT CUE
] from the pull-down list and mark the check
box.
Read more: Using Fader Start (page 61)
Set the range where sound
won’t be output at both
sides of the crossfader.
Use the slider to set the range where sound won’t be
output at both ends of the crossfader.
Adjust the time it takes to
change the volume to
smooth the rapid volume
variation when you use the
crossfader.
Adjusts the time it takes to change the volume to
smooth the rapid variation in the volume when you use
the crossfader.
Adjust the DVS control
tone signal level for
PHONO.
Reduces the signal level if the playback points of the
control vinyl and DJ software deviate while scratching.
Setting item
Description
