background image

106

Specifications

AC adapter

Power requirements.............................................................AC 100 V – 240 V, 50 Hz / 60 Hz
Rated current ...................................................................................................................1.5 A
Rated output .................................................................................................. DC 24 V, 3.75 A

General – Main unit

Power consumption .................................................................................. DC 24 V, 1 000 mA
Main unit weight .......................................................................................... 10.7 kg / 23.6 lbs.
Max. external dimensions ............. (W x H x D) 732 x 82.4 x 382.2 mm / 28.8'' x 3.2'' x 15.0''
Tolerable operating temperature .........................................+5 °C – +35 °C (+41 °F – +95 °F)
Tolerable operating humidity ....................................................5 % – 85 % (no condensation)

Turntable part

Drive method........................................................................................ Servo type direct drive
Motor.......................................................................................... 3-phase brushless DC motor
Braking system .............................................................................................. Electronic brake
Rotation speed.......................................................................................... 33 1/3 rpm, 45 rpm
Rotation speed adjustment range ........................................................... ±8 %, ±16 %, ±50 %
Turntable.................................................................Aluminum die-casting Diameter: 207 mm
Starting torque ......................................................................................0.18 N·m (1.8 kgf·cm)
Start time......................................................................................0.7 seconds (at 33 1/3 rpm)

Audio section

Sampling rate................................................................................................................48 kHz
A / D, D / A converter........................................................................................................ 24bit
Frequency characteristic

USB, LINE, AUX (LINE / PORTABLE), MIC 1, MIC 2 ............................. 20 Hz – 20 kHz

S / N ratio (rated output, A-WEIGHTED)

USB.......................................................................................................................110 dB
LINE ....................................................................................................................... 95 dB
PHONO .................................................................................................................. 84 dB
AUX (LINE) ............................................................................................................ 95 dB
AUX (PORTABLE).................................................................................................. 89 dB
MIC 1...................................................................................................................... 81 dB
MIC 2...................................................................................................................... 81 dB

Содержание SERATO DDJ-REV7























































































































Отзывы: