8
This section describes how to set up connection with DJ mixer as an audio interface using
DJM-900NXS as an example. Install driver software before connection as described in
1
Connect your PC/Mac with a DJM using a USB cable.
Note: We recommend to connect CDJ/XDJs, your computer and a DJM directly with USB cables.
If you use a USB hub, they may not work correctly depending on the USB hub.
2
Launch rekordbox and select PERFORMANCE mode.
3
Click the gear icon
in the upper right of the rekordbox screen to open the
[Preferences] window.
4
Click the audio icon to open the [Audio] window.
5
At the [Audio] section, select the name of the DJM you connected.
(The figure below is an example on Windows. On Mac, it is displayed as [PIONEER DJM-
900nexus]).
If they do not appear in the drop-down menu, install the driver again.
6
Select [External] for [Mixer Mode].
7
Check the settings in [Output channels]. Play the DECK on rekordbox, monitor the sound
from the DJM. If the setting is not the one you wish, change it.
To check the audio from the DJM, select [USB] using the input selector switch for
respective channel.
Example:
The figure below is the input selector switch on the DJM-900NXS.
