3
1.2.2
Driver installation
1
The driver must be installed before connecting your computer to CDJ/XDJ/DJM. When
they are already connected, please disconnect them.
Note: The driver is common for DJ players.
2
Download the driver and manual for your equipment
from “Software & Firmware
Updates” at Pioneer DJ website (
https://www.pioneerdj.com/en/support/software/
).
3
Follow the instructions described in the manual to update the driver.
1.2.3
HID SETTING for CDJ-2000/900
For CDJ-2000/900, HID SETTING should be [ADVANCED].
Press and hold the [MENU] button on the CDJ to open [UTILITY]. Select [ADVANCED] for
the HID SETTING.
Note: This process is not required for CDJ-2000NXS2, CDJ-2000NXS and CDJ-900NXS.
1.2.4
(For Mac only) Creation of an aggregate device using CDJ/XDJ Aggregator
(If you use your DJ mixer or all-in-one DJ system as an audio device, this procedure is NOT
necessary.)
(If you use the same equipment when you launched the CDJ/XDJ Aggregator, this procedure
is NOT necessary.)
When you launch the CDJ/XDJ Aggregator after connecting a Mac to CDJ/XDJ, the following
window will appear and the aggregate device will be created. Then click [OK] and close the
window.
When using the CDJ-350/850, be sure to press the [PC] button on the CDJ to enter PC
connection mode before launching the CDJ/XDJ Aggregator.
