PIONEER DJ DDJ-RZX Скачать руководство пользователя страница 84

Страница: 84 / 103

DDJ-RZX

8.2 UPDATING OF THE FIRMWARE

A. Check the current DDJ-RZX version.

1. Connect your computer with DDJ-RZX.

2. Start the Setting Utility on your PC, as follows:

With Windows OS:

Select Start, All Programs, Pioneer, DDJ-RZX, then the

DDJ-RZX Setting Utility.

With Mac OS:

Select Applications, Pioneer, DDJ-RZX, then the

DDJ-RZX Setting Utility.

3. Check the firmware version.

If the firmware version displayed on the About tab is x.xx.

C. Set up DDJ-RZX for updating:

1. Connect your computer with DDJ-RZX.

Connect your computer and the DDJ-RZX

(connect

USB-A)

using a USB cable.

2. Go into update mode.

While holding [Left DECK SYNC] and [Left DECK SHIFT]

buttons, press the Power button to go into update mode.

D. Update the firmware from your computer:

1. Start updating your firmware.

Close all the applications before you start updating.

<STEP1> Start the updater program.
For

Windows:

Double click [DDJ-RZX_vxxx.exe] to start the

updater program.
For

MacOS:

Double click [DDJ-RZX_vxxx.app] to start the

updater

program.

<STEP2> Select a language.

Select a language from the dropdown list and

click

[OK].

The figure below shows selecting English.

·  If the message “Your DDJ-RZX is not connected” is
  displayed when you click on [OK], see “Corrective actions
  to be taken when ‘Your DDJ-RZX is not connected’ is
  displayed:” described later.

B. Check the downloaded file.

1. Unzip the downloaded file.
For

Windows:

Save the downloaded file [ddj-rzx_vxxx_win.zip] to

an arbitrary directory such as desktop and unzip it.

For

MacOS:

Save the downloaded file [ddj-rzx_vxxx_mac.zip] to

an arbitrary directory such as desktop and unzip it.

The [DDJ-RZX_vxxx_MAC.dmg] file is generated when

the file unzipped and then double click to mount it.

2. Check the unzipped file.
For

Windows:

The [DDJ-RZX_vxxx_WIN_E] folder is generated when

the file is unzipped.

Please ensure the following file is included in the folder.

[DDJ-RZX_vxxx.exe]

For

MacOS:

The [DDJ-RZX_vxxx_MAC_E] folder is generated when

the file is extraced.

Please ensure the following file is included in the folder.

[DDJ-RZX_vxxx.app]

• xxx is the version of the new firmware.
• Extension (.exe or .app) might not be shown depending on
your computer settings.

[2-2] Press the Power button.

[2-1] Hold these two buttons.

[1] Connect a USB cable.

Содержание DDJ-RZX








































































































Результаты поиска

Содержание DDJ-RZX

Отзывы:

Похожие инструкции для DDJ-RZX

Бренды по названию

Популярные бренды

PIONEER DJ DDJ-RZX, Руководство по обслуживанию

Результаты поиска

Содержание DDJ-RZX

Отзывы:

Похожие инструкции для DDJ-RZX

Бренды по названию

Популярные бренды