53
DDJ-RZX
5
6
7
8
5
6
7
8
A
B
C
D
E
F
BPM DOWN
BPM UP
BPM DOWN
BPM UP
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Note:
To weigh a pad down, be sure to place a weight (12 mm dia.) on the center of the pad, with the convex part
(contact area dia.: 10 mm) facing downward.
Be sure to place a weight
on the center of the pad.
Performance pad
Weight for pad calibration
2
-1
Simultaneous calibration of all pads
With all pads weighted down (by placing the weights on all pads), press the PLAY/PAUSE
button on the left deck.
The color of the pads changes to green.
(The A/D values of the pads are obtained.)
If the A/D value of any of the pads is abnormal, that pad starts flashing in red.
2
-2 Calibration of individual pads
While weighting a pad to be calibrated down, press the button corresponding to the pad.
(See the table and figure on the below.)
The color of the pad changes to green.
(The A/D value of the pad is obtained.)
If the A/D value is abnormal, the pad starts flashing in red.
With all pads weighted down, press the PLAY/PAUSE
button on the left deck.
*1: Weighting
