Pinnacle Skillion Series, Руководство по сборке

Страница: 8 / 23

GARDEN SHED
1.51W x 0.77D x 1.9Hm
8
Step 2:
Assemble the rear wall panels
You will find it easier to assemble your shed using sawhorses with timber studs attached (timber needs to be the same length as the
shed (1.5m) or alternatively, a trestle table.
Place 2 x part S83 (Sheet) on your worktable and join them together with the self-tapping screws as per diagram below.
Now fit part 20B (top channel) and 20C (bottom channel) to the sheeting by tapping it in (diagram A) or sliding it in (diagram B). Make
sure that the small lip of the channel is always facing out. This ensures rain water cannot build up inside your shed.
A
RIDGES FACING UP
A
ROOF TOP EDGE
S83
20C
20B
900mm
S83