background image

NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR 

WHILE CONNECTED TO A POWER SOURCE

© 2014, Pinnacle Products International, Inc. 

Indirect Fired Heater User’s Manual 

®

1

Table Of Contents

Safety Information.............................................1-2

Features and Specifications.................................3

100T-IDF-EU Assembly.....................................4-5

170T-IDF-EU Assembly....................................6-7

Operation........................................................8-10

Ventilation.........................................................8-9

Maintenance.......................................................11

Wiring Diagram..................................................12

Troubleshooting Guide.......................................13

Exploded View..............................................14-15

Parts List.......................................................16-19

Safety Information

FIRE, BURN, INHALATION AND EXPLOSION HAZARD. 

Keep combustibles such 

as; building materials, paper or cardboard a safe distance away from the heater 

as recommended by these instructions. Never use the heater in spaces which contain products 

such as; gasoline, solvents, paint thinners, dust particles, volatile or airborne combustibles or any 

unknown chemicals. This is an unvented portable heater. It uses air (Oxygen) from the area in 

which it is used. Adequate combustion and ventilation air must be provided. 

WARNING

DO NOT OPERATE THIS HEATER UNTIL YOU HAVE READ AND THOROUGHLY 

UNDERSTAND THESE SAFETY AND OPERATING INSTRUCTIONS.

Failure to comply with the precautions and instructions provided with this heater can result in death, 

serious bodily injury, property loss or damage from the hazards of fire, soot production, explosions, 

burns, asphyxiation or carbon monoxide poisoning. Only persons who can read and understand 

these instructions should use or service this heater. 

WARNING

Look for this icon throughout the manual for helpful tips on how to 

assemble, use and clean your IDF Heater.

DO NOT START THE HEATER WHEN EXCESS OIL HAS ACCUMULATED.

WARNING

DO NOT START THE HEATER WHEN THE CHAMBER IS HOT. 

WARNING

THE INSTALLATION OF THIS HEATER SHALL COMPLY WITH THE REGULATIONS OF THE 

AUTHORITIES HAVING JURISDICTION.  

Read The Instruction manual: When this symbol is 

marked on a product, it means that the instruction 

manual must be read.

WARNING! Never touch heater until heater

 

 has cooled off.

This appliance can be used by children aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or lack of experience or and knowledge 

if they have been given supervision or instruction concerning use of the appliance in a 

safe way and understand the hazards involved. Children shall not play with the appliance. 

Cleaning and user maintenance shall not be made by children without supervision.

Содержание Protemp PT-100T-IDF-EU





















Отзывы: