Pinnacle LaserPro ZX Series, Руководство пользователя

Страница: 27 / 123

ZX Series USER MANUAL
26
Fig. 3-17 Exhaust System Installation
From the reducing coupler to the Pinnacle ZX Series, use the 4” diameter flexible rubber tubing
provided with your machine. Attach with proper hose clamps. Run this tubing to the inlet of
your odor reduction unit / blower.
Air Assist System Installation
One of the great features of the Pinnacle ZX Series is the Air Assist System. This system keeps a lot
of the heat, vaporized particles and dust from getting on the lens. This extends the life of your lens and
mirrors. Using the air compressor and ¼” tubing, the Air Assist System safely blows heat and excess
particles from the working table towards the exhaust outlet. This allows the exhaust system and the
machine itself to function more effectively.
Follow the steps below to correctly install the Air Assist System.
NOTE:
To take advantage of Pinnacle ZX Series computer controlled Air Assist System,
plug the compressor into the AC Power Outlet on the side panel of the machine.
Use enough flexible ¼” tubing to connect from the air compressor to the Pinnacle ZX Series’s
air assist valve. The valve is located at the lower right-hand side of the front of the machine.
Unscrew the outlet
and reverse it.
Press the ring to pull
out the air tube.
Connect other
end of hose to air
compressor.
Air Flow
Fixer
Turn clockwise to decrease
the air flow and
counterclockwise to increase
the air flow.
NEVER turn
completely off.