Pinnacle EDGE EX33, Инструкции по установке

Страница: 14 / 25

4 - Octagonal
Junction Box
(by others)
Conduit and Fittings
(by others)
Pendant Crossbar (3/8 IP)
#8 Junction Box Screws
(by others)
5” Slip Canopy
3/8 IP Pendant Pipe
Set Screw
4 - Octagonal
Junction Box
(by others)
Pendant Crossbar (3/8 IP)
#8 Junction Box Screws
(by others)
5” Slip Canopy
3/8 IP Pendant Pipe
Set Screw
12655 E. 42nd Ave. #50 Denver, CO 80239 Phone: 303.322.5570 Fax: 303.322.5568 www.pinnacle-ltg.com
PP - to - ST Mount
Step 2:
Non Power Mount
Step 1:
Power at Ceiling
1. Install 4-Octagonal Junction boxes to structure at all
mounting locations.
(see spacing on page 2).
Begin row with
fixture label at first mounting point.
2. Install conduit from building power to J-Box.
3. Install crossbar to J-Box
4. Feed slip canopy over pendant and secure pendant to
crossbar.
5. Feed power from J-Box through pendant and out leav-
ing 12” for fixture wiring.
6. Make all necessary wiring connections.
1. Attach 4-Octagonal Junction boxes to structure at all
mounting locations.
2. Install crossbar to J-Box.
3. Slide slip canopy over pendant.
4. Rotate pendant onto crossbar.
5. Slide canopy up to ceiling level and secure with set
screw.
EDGE
EX33
EX44
© 2017 Pinnacle Architectural Lighting
14 of 25
EdgeEX33_44_Booklet_January 2017
T5/T5HO/T8/LED
1. This product must be installed in accordance with applicable installation and electrical codes by a professional familiar with the
construction and operation of the product.
2. Minimum 90ºC supply conductors
3. All electrical connections must be performed by a certified electrician to applicable local and national electrical codes.
4. Fixtures must be mounted directly to structure.
5. The holding strength of AC cables cannot be guaranteed if the cables are damaged in any way.
Return to
Main Menu