background image

Chapter 1: Introduction

8

MMG Installation, Setup, and Operations Guide

ConnectPlus 1000 Gateway Computer

The ConnectPlus 1000 gateway consists of a computer with an Intel processor that runs the 
Microsoft Windows OS. It also includes a Fibre Channel card for connection to the storage arrays 
via the Fibre Channel switches. This gateway connects the Liquid blue workstation with the 
MediaStream Networked Storage Systems and the MSS 8000 NS server.

ConnectPlus 1000 provides high-speed connectivity with up to 300 Mbps performance over 
industry-standard Gigabit Ethernet. Network data transfer is accomplished through Pinnacle’s 
implementation of standard FTP.

Figure 1-2: ConnectPlus 1000 Gateway Chassis

Liquid blue Workstation

Pinnacle Liquid blue non-linear editing workstations deliver native support for major standard 
video formats, resulting in format independence and eliminating transcoding and degradation by 
recompression. Any combination of DV, DVCAM, DVCPRO25/50, MPEG-2, MPEG IMX, 
Digital Betacam, and uncompressed D1/D5 can be used within a single timeline, all with real-
time playback. High-speed transfer via SDTI reduces capture and mastering time.

The Liquid blue application and the MediaStream Media Gateway client application are installed 
on the Liquid blue workstation.

MMG System Requirements

MSS platforms supported: 900 NS, 8000 NS and 8000SI

MSS 900 NS: Release 2.22 or greater

MSS 8000 NS and MSS 8000si: Release 3.14 or greater

Connect Plus 1000: Version 3.03.7 or greater

MediaStream Server copyDLL: Version 4.9 or greater

MXF is MSS blue compatible MXF format (4ch/16bit) 

Not supported on integrated ConnectPlus 1000/MSi PC of 8000si

Limit of one TCS server per ConnectPlus 1000

MMG must be loaded on source cluster

Liquid blue client 6.1 with Liquid Blue Service Pack 2 supported

Supported on ConnectPlus 1000 IBM 335 and Avnet GWY100 PCs

Содержание 37T100105

















































































Отзывы: