Chapter 4: Workflow and File Transfer
58
MMG Installation, Setup, and Operations Guide
Using XSend
After editing a sequence, you can use XSend to send the finished clip back to the SAN. The
timeline is fused to a single clip that the MediaStream can play out.
Important: Make sure the timeline is configured to the format you wish to use. Timeline Codec
Setup is described in detail in
Setting up Blue Codecs
on page 34
.
Determine the name of the sequence you want to send. The name of the sequence appears above
the inlay (Figure 4-13).
Figure 4-13: Sequence Name
Locate this sequence in the sequences rack.
Figure 4-14: Sequence Rack
Right click the sequence and choose XSend To->XSend to MSS.
Figure 4-15: XSend menu
