Pinnacle Technology LS2C15, Руководство по эксплуатации

Страница: 37 / 46

33
9.2 Making procedure of connector
(1) Select a connector wire (8 pin) by length of L.
(2) Put A end of the connector wire at the edge of blade of pliers
horizontally (note: point against the baffle to ensure 12mm
peeling length), press the pliers and pull out the wire and the
peeling length is about 12mm.
1.Connection order:
green/white, green, orange/white, blue, blue/white
orange, brown/white, white.
2. line Connection order:
orange/white, orange, green/white, blue, blue/white,
green, brown/white, white.
(3) Plug peeling end (A) into 8 PIN PHONE connector as
either Connection order above.
Make sure to plug to the end.
(4) Plug wire connector with 8 pin into the position with logo 8P
of pliers gently, then press the pliers forcefully.
(5) When process end B of connecting wire, don‟t twist
wire and keep the wire with same color in the same position.
Protruding strip
Edge of peeling blade
Edge of cut blade