14
4.
Take away the two pieces
of communication baffle.
5.
Pull up the lock that circled
as the left picture and take
away the FFC cable.
6.
Pull out all connection
cable
from
the
communication board and
take
out
the
communication board.
Installation notice:
1.
Parallel insert the FFC
cable to the lock set, and
use pressing blade (about
3mm) to press down the
lock to buckle up the cable
as picture
①
.
2.
Install connection cables to
the communication board
as picture
②
.
3.
Install the two pieces of
communication
baffle.
Bend the two bars (circled
as picture
③
) a little first,
and then match the baffle
with the board interface,
push baffles toward the
board until they could
couple with each other.
Make sure two bars have a
good contact with the
communication interface
Note: While inserting the
FFC cable as picture
①
,
Please press down it in
parallel line by using the
pressing tool . Otherwise, the
cable will be loose and make
poor contact.
Picture
②
Picture
①
pressing
blade
Picture
③
