HOW TO FILL THE WATER TANK
1. Disconnect the appliance from main power supply outlet.
2. Ensure that the temperature dial is on the
“OFF”
position.
3. Place the iron on its heel rest and tilt forward approximately at a 45 degree angle.
4. Fill water through the water-filling inlet hole up to the
MAX
level mark indicated on
the side of the iron/ water tank. Never fill above this mark.
5. Wipe off any spillages on Iron.
Note:
For the best result, it is advisable to use de-mineralized water or distilled water. Do
not use chemically de-scaled water or any other liquids.
WATER SPRAY FUNCTION
This function can be used at any time and it does not affect other functions. Press the
spray button to spray water on clothes, as often as required.
NOTE:
When using the water spray function, ensure that there is enough water in the
water tank. You may have to pump the spray button several times during first use in order
to start the spraying function.
DRY IRONING
This function irons without the use of steam.
1. First ensure that the water tank is empty.
2. Connect the iron with a suitable mains power supply outlet.
3. Set the steam knob to position
“OFF”
.
4. Turn the temperature dial to the correct ironing temperature according to the
recommendation of the garment label.
5. The pilot light will glow to indicate that the iron is heating up.
6. When the required temperature is reached, the pilot light goes off. The iron is ready
to use.
7. After use, turn the temperature dial to the
“OFF”
position to switch off.
8. Disconnect the iron from mains power supply outlet.
9. Follow cleaning and maintenance instructions.
