Pin Genie PGD718, Руководство пользователя

Страница: 7 / 24

Push toggle button "a"
downwards and pull part "b"
outwards.
Initial position of c: 2-3/8"
Pull "c" to 2-3/4" and release
button "a". Now the backset
has been adjusted to 2-3/4".
Adjust as shown below (only if needed)
3 1 2
2-3/8"
b
a
c
2-3/4" 2-3/4"
O
2.3
Extend the bolt 2.4 Install latch
O
P(2X)
If the latch holes are centered in the drilled
hole, no adjustment is needed.
If NOT, adjust the latch as shown below.
When installing the latch, make sure the
position of the "+" mark is on the bottom
part of the latch.
Extend the latch bolt as shown.
4