Pin Genie PGD718, Руководство пользователя

Страница: 19 / 24

Level Indication
Knock
（
Low
）
Beep*2
Open & Close the door （ Middle / Factory ） Alarm*15 seconds
Force open （ High ） Alarm*3 minutes
OK
Alarm Sensitivity mode
There are three levels of sensitivity.
The flashing circle represents the current sensitity
level.
Choose the required level and
press “OK” . For example, to switch
from Factory setting to Low.
When the alarm system is triggered, the OK button will begin to flash. At the same
time, the " " button on the back will rapidly flash a green and red light. To
deactivate the alarm, you can:
3
1
1 2 3 4
2
3
4
Press
Note:
If the setting switch of the
Alarm Mode has been turned
off, the Alarm Sensitivity Mode
cannot be chosen.Press " " to
return to Setting page.
No passcode preset
Alarm Mode turned off
(Middle)
Long press
Press " " to wake
up the screen
Back up keys
Rotate thumbturn
Press and hold the " " button on the back panel for 3 seconds, or
Enter the passcode, or
Use back up keys, or
Rotate the inside thumbturn.
16
" "