Pima Hunter-Pro 8144, Руководство по установке

Страница: 59 / 116

Programming the System 59
Hunter-Pro Series & Captain 8 Installation Guide
6.5.8.2 Example B for using the SERIAL output
Diagram 46. Serial output - example B
In example B, the Monitoring Stations (#1 & #2) are connected locally (over LAN) and
remotely (over the Internet). The reports to Monitoring Station #1 will be sent in PIMA’s
proprietary protocol (PID); the reports to Monitoring Station #2 will be sent in Building
Management/Home Automation protocol.
By default, both IPs are forwarded to port 10001. If the Monitoring Station’s management
application supports receiving events via 2 different ports with the same IP address, both
Monitoring Stations can be installed on the very same PC/laptop.
6.5.8.3 Local monitoring interval
Set an interval for test reports to the local Monitoring Station.
6.5.9 Modem Call Back
Set Up to 3 callback numbers for the modem that is used to communicate with the COMAX
upload/download application.
When setting call back #1 number, in any attempt to call the control panel's
PSTN no., it will disconnect the call and call the call back number. This is yet
another measure to protect the system from unauthorized access.
6.5.10 Private dialer
Set which events will be reported to the end user via the phone. At least one phone number
must be set (in the User menu).
The next table describes the events in the screen.
Char. Event to report
A All alarm types
A Anti-mask alarms
1 Special Burglary 1 alarms
2 Special Burglary 2 alarms
P Panic alarms
F Fire alarms
INTERNET
SERIAL output
parameters
Monitoring
Station #1
Monitoring
Station #2
3
ENTR
ENTR
NEXT
X10
Communication
ENTER/NEXT/END Private Dialer
ENTER/NEXT/END 
AA12PFDMOL
++++++++-+