Pima Hunter-Pro 8144, Руководство по установке

Страница: 49 / 116

Programming the System 49
Hunter-Pro Series & Captain 8 Installation Guide
6.3.3.2 Deleting a wireless zone
6.3.3.3 Setting the wireless zones' supervision interval
6.3.4 Keypads setup
Set the number of up to 8 monitored (addressable) keypads. The system supervises every
keypad that carries an ID other than zero (1-8). The IDs should be set consecutively from #1.
If monitoring the keypads is not required, the number of keypads should
be left zero.
6.3.4.1 Keypads partitioning
When implementing partitions in the alarm system, keypads partitioning allows for each keypad
to control some partitions – i.e., arming and disrming them, and have no control on others.
Up to 16 partitions can be set in the Hunter-Pro series, 4 in Captain 8.
In the keypads partitions screens the numbers printed below the LCS screen serve as the
partitions’ numbers.
1.
Enter a keypad number or scroll using [NEXT] and [BACK].
2. Set to ‘+’ the partitions that this keypad will control. In the following example screens,
keypad #3 controls partitions 1-2 ,5-8, 14-16 in the Hunter-Pro, and 1-2 in Captain 8.
3. Press [ENTR] to save and set the next keypad, or press [END] to exit.
6.3.5 I/O-R Expander settings
Set the number of I/O-R relay expanders. Each expander has 8 relay outputs.
The I/O-R cannot be connected to Captain 8
ENTR
1
Wireless Setup
ENTER/NEXT/END
ENTR NEXT
X2

Delete Zone?
ENTER/NEXT/END
ENTR
NEXT
Delete Zone? 9
Please Wait...
. . . .
Device Deleted
Press END
Enter zone
number
Add Zone?
ENTER/NEXT/END
Supervision:
ENTER/NEXT/END Supervision:
Hrs:12 Min.s:0
ENTR
1
ENTR NEXT
X2

ENTR
BACK
KPD 3 partitions
++--++++-----+++
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
KPD 3 partitions
++--
1 2 3 4
Hunter-Pro Captain 8