Safety
Operating instructions PSSu E PD(-T)
21304-EN-04
10
3
Safety
3.1
Intended use
The module may be used for additional connections to the periphery supply. The periphery
supply can be drawn from the connections, but may not be fed through that route.
The module PSSu E PD-T is suitable for use where there are increased environmental re-
quirements (see Technical Details).
Intended use includes making the electrical installation EMC-compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the module
}
Use of the module outside the areas described in this manual
}
Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by
}
PSSuniversal Configurator and PSSuniversal Assistant from Version
1.4.0
}
PAS4000 from Version 1.0.0
– We recommend that you always use the latest version (download
from www.pilz.de).
The PSSu E PD module may be used in conjunction with the following base modules:
}
PSSu BP 1/8 S
}
PSSu BP 1/8 C
}
PSSu BP-C 1/8 S
}
PSSu BP-C 1/8 C
}
PSSu BP 1/12 S
}
PSSu BP 1/12 C
}
PSSu BP-C1 1/12 S
}
PSSu BP-C1 1/12 C
The module PSSu E PD-T may be used in conjunction with the following base modules:
}
PSSu BP 1/8 S-T
}
PSSu BP 1/8 C-T
}
PSSu BP-C 1/8 S-T
}
PSSu BP-C 1/8 C-T
}
PSSu BP 1/12 S-T
}
PSSu BP 1/12 C-T
}
PSSu BP-C1 1/12 S-T
