Pilz PSSnet GW1 MOD--CAN, Руководство по эксплуатации

Страница: 31 / 42

Commissioning
Operating Manual PSSnet GW1 MOD­EtherCAT
1002692­EN­03
31
}
Minimum conductor cross section on field connection terminals = 0.2 mm 2 (AWG24),
}
Maximum conductor cross section on field connection terminals = 2.5 mm 2 (AWG12),
}
Terminal points per connection: 2,
}
Stripping length: 9 mm.
6.2.2 Terminals
The plug­in terminals for the inputs and outputs are not supplied with the system. You can
select between spring­loaded terminals and a screw connection.
6.3 Terminal configuration
Module supply Terminal configuration X4
4­pin female con­
nector
1 +24 V infeed for module supply
1 2 3 4
2 0 V infeed for module supply
3 Not connected
4 Functional earth
Terminal configuration
6.4 Interfaces
The following minimum requirements must be met:
}
Ethernet standards (min. Category 5) 100BaseTX
}
Double­shielded twisted pair cable for industrial Ethernet use
}
Shielded RJ45 connectors (industrial connectors)
6.4.1 RJ45 interface
RJ45 socket, 8­pin PIN Standard Crossover
8 1
1 TD+ (T) RD+ ()
2 TD­ (Transmit­) RD­ (Receive­)
3 RD+ () TD+ (T)
4 n.c. n.c.
5 n.c. n.c.
6 RD­ (Receive­) TD­ (Transmit­)
7 n.c. n.c.
8 n.c. n.c.
Interface assignment of RJ45 socket
n.c. = not connected