Putting into Service
Operating Manual PMI 6
1003280-EN-01
26
7.2.11
Taskbar and desktop
Set taskbar properties and show/hide desktop icons
7.2.12
Network servers
Start and stop various services (Telnet, SMB, FTP, SNTP, Web Server)
7.2.13
Internet options
Internet Explorer settings
7.3
Start mode
7.3.1
Automatically copy to system folder (\windows)
A folder can be created in
\BOOT\Windows\
to add additional libraries or fonts (TTF) to the
system. All files and directories are copied to the system folder
\Windows
on start-up. Fonts
(TTF) in the folder
\BOOT\Windows\Fonts\
are also registered.
Tip: Memory-intensive fonts should be installed on the external
Storage Card
using
fontreg
(see
Windows CE Shell commands - Pilz expansions [
35]
).
7.3.2
Batch file PMIStart.cmd
PMIStart.cmd is a CE Shell command batch file, which is executed sequentially after boot-
ing. Commands can be found under
Windows CE Shell commands [
34]
and
Windows
CE Shell commands - Pilz expansions [
35]
. The batch file PMIStart.cmd can be found
in the directories
\Hard Disk
,
\Storage Card
and
\BOOT
.
If the batch file exists in one of the above directories, then it is executed once, i.e. if the
batch file exists in all three directories, only
\Hard Disk\PmiStart.cmd
will be executed and
not the other two batch files. The sequence is as follows:
\Hard Disk, \Storage Card
and fi-
nally
\BOOT.
7.3.3
Running services
All network services (FTP, Telnet, HTTP, SMB, SNTP) are switched off on start-up (see
Network servers [
26]
).
