Putting into Service
Operating Manual PMI 6
1003280-EN-01
21
7
Putting into Service
Procedure after power-up
There may be a delay of up to 60 seconds between power-up and the device being ready
for operation. The application software can then be installed and started.
7.1
Activating the setup
Click on
Setup
to start the PMI Assistant. The SD card supplied on which the PMI Assistant
is installed must be connected to do this. When the SD card is not connected, the Control
Panel is started.
Further information on the PMI Assistant can be found in the "PMI Assistant Operating
Manual".
7.2
Control Panel
All system settings can be made from the Control Panel of Windows Embedded Compact
7.
Special features and device-specific settings are described in the following!
7.2.1
Backup and restore
Program which you can use to save or restore an entire directory structure.
7.2.2
Password settings
