Pilz 570603, Руководство по эксплуатации, Страница: 11 / 30

PSEN sl­1.0n 1.1/2.1/2.2
Operating Manual PSEN sl­1.0n 1.1/2.1/2.2
22174­EN­03
11
Recommended cable cross sections
Prerequisite:
}
Supply voltage: 24 V
}
Cable type: LiYY 5x0.25 mm² (79 Ohm/km) from Pilz
Max. load per safety output 100 mA 500 mA
Cable length 45 m 24 m
If cable lengths greater than those stated in the table are required, please contact Pilz.
Pin assignment
1
2
3
5
4
5­pin M12 connector
PIN Function Terminal designation
Cable colour (Pilz
cable)
1 +24 UB A1 Brown
2 Output, channel1 12 White
3 0 V UB A2 Blue
4 Output, channel2 22 Black
5 "Lock_Unlock" S31 Grey
The wire colour also applies for the cable available from Pilz as an accessory.
Connection to evaluation devices
Make sure that the selected evaluation device has the following properties:
}
Dual­channel with feasibility monitoring
}
OSSD signals are evaluated