Operation
Operating Manual PCOM sec br2
1004534-EN-04
| 39
Setup
Colour
State
Meaning
- - -
Setup mode is deactivated
Green
Device is in setup mode
I0
Colour
State
Meaning
- - -
No signal at the input
Green
There is a 1 signal at the input
O0
Colour
State
Meaning
- - -
No signal at the output
Green
There is a 1 signal at the output
TRF
Colour
State
Meaning
- - -
No data traffic
Yellow
Data traffic present
LNK
Colour
State
Meaning
- - -
No network connection
Green
Network connection exists
11.2
Recovery
If you experience problems with the configuration, a failed firmware update or any other
situation in which the system is no longer functional, it may be necessary to reset the sys-
tem.
Typical problems that require a system reset:
}
Interrupting the supply voltage during the firmware update
}
Forgotten password
}
Incorrect configuration of the IP address
}
All the data must be deleted, when the SecurityBridge is to be decommissioned for ex-
ample (see operating instructions, Section