Operation
Operating Manual PCOM sec br2
1004534-EN-04
| 41
11.4
Take SecurityBridge safely out of operation
Before disposal, SecurityBridge has to be safety decommissioned. To do this, all the data
have to be deleted from the device.
Proceed as follows:
}
Reset the configuration to the factory settings as described in the chapter
.
}
Switch off the SecurityBridge.
}
If you used an USB memory, remove the USB memory from the SecurityBridge and
format it on the configuration PC. Do not carry out a quick formatting. Alternatively, you
can use a program to safely delete data or destroy the memory mechanically.