pilotair ACT 100T, Руководство пользователя по обслуживанию и запасным частям

Страница: 6 / 56

6 | P a g e
7425MUM217_EN_05.0
Safety Rules
3 Safety rules
3.1 Definition of the conventional signs used in this manual
Carefully read instruction manual before attempting any service or maintenance procedures on the dryer.
Caution warning sign. Risk of danger or possibility of damage to equipment, if related text is not followed
properly.
Electrical hazard. Warning message indicates practices or procedures that could result in personal injury or
fatality if not followed correctly.
Danger hazard. Part or system under pressure.
Danger hazard. High temperature conditions exist during operation of system. Avoid contact until system or
component has dissipated heat.
Danger hazard. Treated air is not suitable for breathing purposes; serious injury or fatality may result if
precautions are not followed.
Danger hazard: In case of fire, use an approved fire extinguisher, water is not an acceptable means in
cases of fire.
Danger hazard. Do not operate equipment with panels removed.
Maintenance or control operation to be performed by qualified personnel only [1].
Compressed air inlet connection point
Compressed air outlet connection point
Condensate drain connection point
Operations which can be performed by the operator of the machine, if qualified [1].
NOTE: Text that specifies items of note to be taken into account does not involve safety precautions.
In designing this unit a lot of care has been devoted to environmental protection:
•
CFC free refrigerants
•
CFC free insulation parts
•
Energy saving design
•
Limited acoustic emission
•
Dryer and relevant packaging composed of recyclable materials
This symbol requests that the user heed environmental considerations and abide with suggestions annotated
with this symbol.
[1] Experienced and trained personnel familiar with national and local codes, capable to perform the needed activities, identify and avoid
possible dangerous situations while handling, installing, using and servicing the machine. Ensuring compliance to all statutory regulations.