pilotair ACT 100T, Руководство пользователя по обслуживанию и запасным частям

Страница: 24 / 56

24 | P a g e
7425MUM217_EN_05.0
Technical Description
7.12 Electronic Instrument DMC 15 (Standard)
7.12.1 How to Switch On the Dryer
- Power the dryer and switch it on using the ON-OFF switch (pos.1 paragraph 7.1).
- During normal operation led
ON is ON and the display shows the DewPoint temperature by
means of two coloured areas (green and red) above a 10 Led display :
• Green area - operating conditions ensuring an optimal DewPoint;
• Red area - DewPoint too high, the dryer is operating with high thermal load (high inlet air
temperature, high ambient temperature, etc.). Compressed air treatment may be improper.
Led shows that condensate drain solenoid valve is ON.
Led
shows that condenser fan is ON
(Not used ).
- The condensate drain test is always active using the button .
7.12.2 How to Switch Off the Dryer
- Switch it off using the ON-OFF switch (pos. 1 paragraph 7.1).
7.12.3 How a Service Warning / Alarm is Displayed
- A service warning / alarm is an unusual event that must recall the attention of the operators / maintenance
technicians. It does not stop the dryer.
- Service warnings / alarms are automatically reset as soon as the problem is solved.
NOTE: the operator / maintenance technician must inspect the dryer and verify / solve the problem
that generated the service warning
.