Cowling Installation:
The cowling is secured using two separate methods. The top half
is secured with screws installed through the canopy hatch
opening, while the bottom half is scured with two screws installed
from the outside.
Place the model upside down and put masking tape next to the
two blind nuts that will secure the bottom half of the cowl.
Draw a line, and mark how far the hole is from a given point on
the masking tape.
Place the model upright, and position the engine cowling in place
and secure using the top screws.
Turn the model over again, add masking tape to the cowl and
continue the previously drawn line onto the cowl, and mark the
location of the hole.
Remove the cowl and drill the two holes as required.
