PETROL /DIESEL DRIVEN UNITS
Please refer to OEM documentation in reference to
care and operation of your petrol/diesel engine.
This unit has been designed to “idle down” to
minimum operating speeds when factory set cut-
out pressures are reached. This saves both fuel
consumption and wear on moving parts. When
pressure drops to set cut-in pressures the unit will
automatically resume pumping at normal operating
speeds.
To facilitate easy starting of the unit and to ensure
no damage to the electric starter (where fitted)
always open the “EASY START” valve until the unit
is operating and then close for normal operation.
This valve is located on the motor/pump platform
(models K25P,K30P) or in the discharge pipe from
the pump to the air receiver (other models).
SAFETY
Pressure vessels (air receivers) are a type of
plant, and as such,
MAY
be required to be
registered with the relevant statutory authority
in your state. Regulations regarding plant
registration vary from state to state. Check
with your relevant government authority about
plant registration.
Compressed air can be dangerous. Never point
compressed air tools or equipment towards
another person.
5
Содержание TM300I
Страница 1: ...INSTRUCTION AND PARTS LIST MODEL TM300I 1...
Страница 12: ...12...
