Pike Evolution PT4+ Скачать руководство пользователя страница 15

13

Radio channels

Evo controllers that show the 

MULTI

 logo on 

their front panels offer a greatly increased 
number of radio communication channels (1 
to 17). This compares with the first generation (

Standard

) Evo 

controllers, which provide channels 1 and 2.

When mixing Multi-channel and standard controllers

If 

all

 of your Evo controllers are the 

MULTI

 type, then you can use 

any of the available 17 channels: 

However, if your installation contains 

any

 standard Evo controllers 

(those that do not have the MULTI logo) then you must choose 
either channel 

1

 or channel 

2

 for all units. 

All controllers are 

MULTI

,  

so any channel between  

1

 and 

17

 can be used.

If you choose channels 

3

 to 

17

 then the standard controller(s) will 

not be found and the installation will not run.

IMPORTANT: Obviously, you need to ensure that all controllers 
within a set are configured to use the same radio channel.

 

One or more controllers are 

Standard

 (non-MULTI), so only 

channels 

1

 or 

2

 can be used. 

Using the scan option

1

 Press 

POWER

 to switch on. The text display will show 

Radio 

Channel xx

, where 

xx

 is the last channel used. 

2

 Press   to advance to channel 17 and then press once more 

to show 

Radio Chan. SCAN

. Press 

SELECT

  Note: The controller must be in Master mode to access the 

Scan function.

  The controller will now scan the radio channels. After roughly 

20 seconds, the text display will show the first available 
clear radio channel that was detected during the scanning 
process.

3

 Press 

SELECT

 to choose the recommended channel, or 

manually choose a different channel.

4

  Continue with the usual configuration steps. Don’t forget to 

manually select the same radio channel on all of the other 
Evo controllers within the set.

Discovering the radio channel during operation

When the system is running, you can check which radio channel 
is being used as follows:

1

  During normal operation, on the master controller, press the 

SELECT

 button. The text display will show the current battery 

charge.

2

  Press the   button to show the radio channel:

 

Radio Channel 01

3

  Press the 

SELECT

 button to return to the normal display (or 

wait for 12 seconds and the text display will automatically 
return). 

Содержание Evolution PT4+









































Отзывы: