PiiGAB 810/20, Руководство пользователя

Страница: 3 / 15

3
S
ta
rtKi
t1
_
2
.E
.1
.1
3
Introduction
This document will describe how to configure PiiGAB Start Kit 1 & 2 with PiiGAB 810 and RELAY PadPulse
M2 communicating over M-Bus.
Difference between StartKit1 and StartKit2
The only difference between StartKit1 and StartKit2 is the M-Bus load configuration of the PiiGAB 810
gateway. The configuration of both StartKits is the same.

StartKit1: PiiGAB 810/5 (five M-Bus loads)

StartKit2: PiiGAB 810/20 (twenty M-Bus loads)
Requirments

One PiiGAB 810 gateway

One RELAY PadPulse M2 gateway

One 24VAC or 24VDC power supply

A local area network (LAN) with DHCP

PiiGAB M-Bus Setup Wizard 3.1.0 or later

PiiGAB Explorer / M-Bus OPC-server

PiiGAB StartKit1_2.zip
Optional requirements

RELAY’s Tools and Docs CD